WELDING MACHINE INVERTER MMA250

Hot start - Smooth Welding Starter: A mechanism that adds more power at startup to make welding start easier. Easy arc start, with automatic overheating and overvoltage protection
Arc Force: Power supply with more power in difficult welding cases. In this way, on the one hand the electrode cannot stick to the weld pool and on the other hand the length of the arc will be much longer without stopping at the amateur hands which are usually unstable.
Antistick - Non-stick function: allows easy removal of the electrode in case of sticking without overheating
It is protected from voltage fluctuations (+/- 15%) and can be used with a generator regardless of whether the generator has a stabilizer
Amper's digital display panel helps the inexperienced in setting the current
Suitable for gluing metals, stainless steel, cast iron, etc.
Upgraded arc characteristics. Stable and better welding, less splashes, less noise when gluing
The PWM (Pulse Width Modulation) function and the continuous output current regulator allow the welding current to be precisely adjusted
Large turnover (250A @ 60%) and high efficiency (85%)
Small size, light weight, high quality construction, energy responsible
The digital volume control panel is protected by a plastic cap to prevent the facade from burning, from sparks
 

specifications

Use: steel electrodes, stainless steel and cast iron
Adjustment: 20A to 250A
Electrodes: Φ 1.6 mm to 6.0 mm
Yield 20: 60% @ 250 A
Nominal load voltage: 70 V
Power supply voltage: 230 V (32 A) 50/60 Hz
Links: 35/50 mm
Degree of protection: IP21S
Dimensions: 33 x 20 x 12 cm
Weight: 4.8 kg
 

* Required Generator Performance 8.75kVA or 7kw

 

Includes :

1 carrying case
1 pair of electrodes
1 ground pin (body)
1 shoulder strap for high applications and handle on the chassis of the machine
1 set of cables
1 bow protection mask
matsakoni-brush

Report error